|
|
|
|
|
|
|
#1
06-04-2012, 05:01 PM
|
|||
|
|||
|
Door lock problem 2002 ML320
Seems my rt rear door lock knob dropped into the panel.Wife pushed it down because it was machine gunning and wanted to manually lock the door.How hard is it to change that actuator and is that the problem.Can they be repaired.Thanks also any tips on removing the door panel will be appreciated.
Last edited by Devil Dog; 06-05-2012 at 01:19 AM. 
|
|
#2
06-04-2012, 05:17 PM
|
||||
|
||||
|
For the vacuum, take a look here
http://www.peachparts.com/shopforum/diesel-discussion/316926-door-vacuum-pods-lock-unlock.html
__________________
1985 300D 198K sold 1982 300D 202K 1989 300E 125K 1992 940T "If you dont have time to do it safely, you dont have time to do it" "The democracy will cease to exist when you take away from those who are willing to work and give to those who would not."
|
|
#3
06-08-2012, 11:17 PM
|
|||
|
|||
|
Changed door lock actuator and door locks fine.I have trouble with the handle the two screws loosen the handle spring piece but I have no good spring tension.Am I missing something or not adjusted properly or is it the spring part is weakened....
|
|
#5
11-11-2012, 12:39 PM
|
|||
|
|||
|
Door lock problem 2002 ML320
Hey guys, a dumb question. I cant lock my drivers door by pushing the button down. It will lock w/ the key after its closed only. Is this designed like this? If not, what is wrong?
|
 |
| Bookmarks |
|
|
Hybrid Mode
