Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > ML, GL, G-Wagen, R-Class, Unimog, Sprinter

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-14-2009, 01:59 PM
jeff black's Avatar
Registered User
 
Join Date: Mar 2009
Posts: 10
Leaking compressor on an ML320

Hey, guys! This is my first post. I saw something last week that I have been wondering about. We had an early (1998, I think) ML (163) with marginal A/C cooling. I performed the evacuate/recharge, which got the A/C cooling again. Only .55/lb was recovered, so I looked for a leak. There was a valve in the bottom of the compressor with refrigerant oil dripping off it. There was (is) a screw in the middle of this valve, which I discovered was loose. The oil/refrigerant was coming out around the screw threads. I didn't tighten the screw because I was worried it may have been an adjustment, and the customer was hanging around hoping I wouldn't be too long. We wound up pricing him the worst case scenario (compressor and drier), but now I'm wondering if that leak could be stopped. So, has anybody else had experience with a leak from that valve? Sorry this is wordy, thanks for reading!
Reply With Quote
  #2  
Old 03-15-2009, 11:49 PM
jeff black's Avatar
Registered User
 
Join Date: Mar 2009
Posts: 10
Boy,this is going great! Let me also ask that everyone keep their comments brief and to the point! Limit one response per household, please!
Reply With Quote
  #3  
Old 03-16-2009, 08:28 AM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Other than tightening that plug, replacement of the compressor will be required as replacemnet parts like that are not available.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #4  
Old 08-21-2014, 02:20 PM
Doktor Bert's Avatar
Das Sturm Uberdoktor
 
Join Date: Jan 2005
Location: Palm Springs, CA.
Posts: 2,670
Pressure Control Valve...
__________________
Did you just pass my 740 at 200 kmh in a 300SD?????

1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013



100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership

Last edited by Doktor Bert; 08-21-2014 at 02:36 PM.
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page