Can anyone give me the measurements for the ML320? I want to know the strength for some bolts! it is 1/2 inch and can go to to 150 ft lb. range I'm sure all you techs memorized the .Nm's! hehe TIA, do you have the measurements for....

the bolts on the brake caliper?
spark plugs?
lug bolts?
drain bolt?

if you guys know any other measurements please post the numbers here! thanks man

I do know the wheel bolts (nobody calls them lug bolts) are 110 ft/lbs on an ML, that''s the same as 150nm.
The spark plugs are 28 or 29 nm.
The drain plug I never pull anymore on an ML especially, or any other 112/113 engine, I think it's 20 nm.

Gilly

http://www.onlineconversion.com/torque.htm

__________________
Click here to see the items I have up for auction at EBay

Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold)

couldn't resist it only costed me $18 US here... thanks! it has a great metric conversion chart . on the torque wrench uses these
measurements.. i guess the most common one i will be using is TORQUES (pounds).

DaN.m (M. and KGS)

and

TORQUES (foot and pounds)