I installed a D-Link 54G PCI wireless network card in a Dell P-III with an AGP video card. When I turn on the PC, there's no signal to the monitor. If I remove the wireless card, the video works. I spent some time on the Dell and D-Link websites but I couldn't find specific help. Any thoughts?

Thanks,
Sixto
95 S420
87 300SDL

Thats really strange.

You might check during boot up if there is a conflict, I haven't checked this for a while but there are setting in the BIOS for interupts etc. Reserved for ...

Try the D-link card in another slot, there are normally 2 PCI channels, try and get to the other one. Sometimes you can't use the first slot, or some cards in the first slot.

If nothing else call D-link support, it is 24x7, although good and bad.

I support a lot of D-Link stuff, and have called several times.

KlK, MCSE

__________________
KLK, MCSE

1990 500SL

I was always taught to respect my elders.
I don't have to respect too many people anymore.

If possible leave an empty slot between cards