|
|
|
|
|
|
#1
|
|||
|
|||
|
1/4 inch auto fuel line OK for propane?
Have a propane grill hose that is leaking, it is the barbule/crimp type and the rubber is all hard - it is leaking around one of the crimps.
I have bought the same size hose in auto fuel (gasoline) line from Autozone along with some small hose clamps I plan on using. Question - will the hose be OK? Will it contain the propane, or do I need to buy specialized propane hose? I looked at the old hose, and some markings indicate liquid petroleum, CGA (whatever that means), and 1 psi. The gasoline fuel hose is good for 50 psi. And isn't gasoline more volatile than LP or propane? So why is a "special" hose used for the propane? Is it really necessary? Thanks in advance!
__________________
08 W251 R350 97 W210 E320 91 W124 300E 86 W126 560SEL 85 W126 380SE Silver 85 W126 380SE Cranberry 79 W123 250 78 W123 280E 75 W114 280 |
|
#2
|
|||
|
|||
|
After the regulator, the line pressure should be pretty low, not any higher than a pressurized auto fuel line, so I would think that hose should be ok.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
|
#3
|
||||
|
||||
|
Considering the ramifications if the propane attacks the replacement hose, I would only go with the real thing. It's one of those situations where saving a few bucks could cost thousands. Not to mention what your insurance company might say if there were to be an accident.
just my $.02, Wes |
|
#4
|
|||
|
|||
|
Excellent post, Wes, that's exactly what I'm getting at. Does anyone know if propane will attack a regular gasoline fuel hose?
__________________
08 W251 R350 97 W210 E320 91 W124 300E 86 W126 560SEL 85 W126 380SE Silver 85 W126 380SE Cranberry 79 W123 250 78 W123 280E 75 W114 280 |
|
#5
|
|||
|
|||
|
Here is " The Scoop " from a certified LPG fitter for 37 years. ( me ).
Propane Low Pressure hoses must be of neoprene material. The " sticky " part are the ends. Factory-crimped assemblies must be used. Hose clamps are not acceptable. Fuel pressure after the regulator is 11 " w.c. ( water column ), which equals less than 1 p.s.i.. Having said all that, a new certified hose assembly should set you back about $ 10.00 at your local propane supplier, Home Depot, any Hardware store, etc.
__________________
2007 C 230 Sport.
|
|
#6
|
|||
|
|||
|
Quote:
Could be some issues with molecule size. I think I remember that a plastic garbage bag won't hold natural gas. - don't ask |
|
#7
|
||||
|
||||
|
Quote:
__________________
2009 ML350 (106K) - Family vehicle 2001 CLK430 Cabriolet (80K) - Wife's car 2005 BMW 645CI (138K) - My daily driver 2016 Mustang (32K) - Daughter's car |
![]() |
| Bookmarks |
|
|