Anyone know of a similar board for Chevy Tahoes?

[brookspw]

Trying to find an answer about putting 20" wheels on a 2003 Tahoe but I can't find any good boards. I find plenty, but they are a bunch of crap, not like the good board we have here.

Thanks

[xan021]

Try doing a search on Google, that's how I found this one.

[brookspw]

Originally Posted by xan021

Try doing a search on Google, that's how I found this one.

Well, I just said I searched (on google) and found crap.

[deanyel]

You should try a google search.

Seriously I'd be surpised if there was a good one. I just don't think many Tahoe owners are all that passionate about it and all the under 5'4" female owners tend not to work on their own cars.

[riethoven]

Originally Posted by deanyel

You should try a google search.

Seriously I'd be surpised if there was a good one. I just don't think many Tahoe owners are all that passionate about it and all the under 5'4" female owners tend not to work on their own cars.

Ditto. I think people who own Tahoes don't care about their vehicles like us MB people do. We have a passion. They have a big tank that they can see over the top of everyone with.

No offense intended. I drove a Chevy pickup for 10 years and a Chevy van before that. They were good transportation but I did not care for them like I do for my Benzes.

[Merkey]

This is the one I use:
http://www.automotiveforums.com/vbulletin/forumdisplay.php?f=1090

[suncat]

I run the whole gambit with a '95 C280, a '65 Corvair and an 01 Yukon (GMC equivalent to a Tahoe). The 'Vair satisfies almost all of my general repair urges, and it is very simple to work on. The MB, being a bit older than the Yuke, requires a little more maintenance and know-how, and thanks to this board, I can figure out most basic repair things. The Yukon gets PM and oil changes by me (as do all my cars), but other than that, it's off the mechanic. I tried to drop the tranny pan on the Yukon last year to change the fluid & filter, and couldn't even do that myself! Had it towed to the mech. to finish the job. Ridiculous.

[suncat]

Originally Posted by Merkey

This is the one I use:
http://www.automotiveforums.com/vbulletin/forumdisplay.php?f=1090

Nice find. That looks like a pretty good one (after just looking at it for 1 minute).

[Merkey]

I have an 87 454 Burban... the beast is alive!
Its the best board I have found for it....
Only problem is I am used to the MB and Alfa Romeo boards, and am completly spoiled!

[Kestas]

Try these:
http://www.fullsizechevy.com/forums/
http://www.gm-trucks.com/forums/