![]() |
Fixed my coffeemaker
My electric drip coffeemaker had stopped functioning. It was producing steam and not much hot water. I figured this could only happen if it wasn't getting enough water. But the reservoir was full. After disassembly I discovered a vinyl hose connecting the reservoir with the heating element. Inside the vinyl hose were two little rubber valves which I assume are there to stop the hot water from going back into the reservoir, forcing it to expand up the outlet. Inside one of those rubber valves was a relatively large piece of unground cofffee bean, hindering the flow of water into the heating element.
Back to good coffee in the morning. |
Nice work.:cool: A lesser man would have tossed it and bought a new one.:D
|
I like my French press. I can see everything that is going on in there and I'm actually capable of fixing anything that goes wrong with it.
|
Exactly... 99.99% would have chucked it. The MB ideology has really taken root with you.
Guess you thought it was a monovalve... |
Just the idea of trying to properly clean a drip coffee maker . . .
|
A crisis narrowly averted. ;)
|
Quote:
|
OK........now fix mine:
Nothing, whatsoever, from the pump up to the basket........... |
Sorry , my expertise is limited to the pumpless.
|
Quote:
|
I'd have fixed mine.... :D
Though most coffee makers I've seen die was because the heating element finally failed....not much you can do about that. |
Quote:
|
Quote:
Doesn't matter what the problem: " well, um, probably 1500 to 2000 dollars, should be done by this afternoon...":mad: |
Quote:
|
My studio mic was DOA for over a year now...ever since it fell off a boom stand.
Took it apart this weekend and found a detached transducer wire from the soldered end. Resoldered and voila! Working again! But noisy PC power supply fan hampered the euporia of testing the newly-repaired mic. So I pulled the power supply from one of my defunct PC cases and swapped fan motors. All quiet again! Loving the revival of repaired gear for no $$$!!! |
Quote:
So whose economy are we talking about here?:drink:(tall black coffee) |
Does anyone HERE have an old fashioned stove-top perking coffee pot? The kind with the little cylindrical basket on a post...you fill the pot about 5/8ths full of cold water, about 4 scoops of your favorite flavor caffeine in the basket, put the top on the basket, lid on the pot and, put the stove on HIGH and put the pot in the center of the element and watch the coffee boil up and out the top of the tube and dribble down and over the ground in the basket and back into the bottom of the pot and it goes through the same routine over and over and over for about 5-9 minutes...to FINALLY end up as a hot, steamy cup of grounds-in-the-bottom-of-the-cup cup of coffee?
The only difference between that and a camp fire pot of coffee is the heating element...white-hot camp-fire logs or the electric element on the stove top (or gas burner)... Personally, I like the smells of the outdoors and hot coals...;) |
They're like $9.99 these days for a new one.
Good fix, dude! |
Quote:
Here's mine: http://www.gogoods.com/product/FCP280?META=become-FCP280 http://i204.photobucket.com/albums/b...ger/fcp280.jpg I like the sound of a coffee percolator. It reminds me of Grandma's house, although she had a 15 cup percolator with a clear glass knob on top that you could see the coffee bubbling in.:cool: |
I just fixed the $14 Burr Coffer Grinder I picked up at Goodwill. That thing was clogged, and was just plain nasty, so I gave it a good cleaning, and good as new now.
|
Quote:
If you want a cool old school coffee maker that actually brews really good coffee, try a vacuum brewer: http://www.sweetmarias.com/yama_images/yama_5_cup.jpg |
Quote:
|
Quote:
Just the mechanics please... :rolleyes: :D |
Quote:
In looking at the Deere parts breakdown I realized that his tractor didn't have a pre-filter..the little clear filter that all diesel MB have to trap the 'big' chunks of fuel crud. I took one from my parts bin, installed it and he's been tractoring happily ever after. Cost? ~$2.50 |
I have a Cona brewer. Bought it a few years ago. :D
Got it from Sweetmarias.com http://www.sweetmarias.com/cona.complete1.jpg |
We use a Bunn coffee maker, has a tank that keep the water hot. pour in the cold water and coffee comes out right now :D
III ccccant wwait ffffor mmmmy cccoffeee iiiin tthe mmmorning, nneeed mmmmy fffix. :D these Bunns cost over $100.00, but last for a long time. I now pick them up at Good Will or salvation Army for like $7. usually they get tossed because they start leaking. The problem is in the top. remove the cover where water is poured in. remove the slotted nut where water drains into the tank. and clean the rubber washer and nut of calcium, and replace. all fixed. I think the heating and cooling tends to loosen the nut. Yeah as a kid, I remember the purculator pots with the glass bubbler on top, and the ones on the stove top. sure brings back memories. we wern`t so high tech back then. now every one is a coneseur:rolleyes:. There is nothing like the 40 gallon pot we had on the ship back in my navy days. :D my finger still has a bend to it from my mug.:rolleyes: Charlie |
Ewwww. Coffee is gross. I'd much rather have that Dr. Pepper in the morning. I went to Boston once and their iced tea tasted like coffee. Gross.
|
Quote:
|
Quote:
http://i204.photobucket.com/albums/b...-angry-mob.jpg |
Quote:
I just got a milk steamer for Christmas. Mmm... steamed milk with a little vanilla syrup or just some honey. Good stuff, especially at night when I don't want the caffeine that comes with a lot of tea. |
Quote:
|
Quote:
|
That's how I quit drinking Dr. Pepper regularly! :D
|
Quote:
|
I've been inspired. For breakfast this morning, I broke out the French press and brewed some loose Edelweiss tea that my wife and I picked up last year on our trip to Garmisch. Note to self: get back to the Teestadl am kurpark next trip to Garmisch and RESTOCK!
|
All times are GMT -4. The time now is 04:47 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website