Sometimes its difficult to switch gears on my Peerless 9000 005 transaxle in my leaf chipper. I have to really push or pull the shifter to get it to engage or disengage. The shifter and cable are well lubed so that's not the problem. I removed the cable and tried shifing the lever by hand. Even that was hard or not possible sometimes. Strange, but it seemed to shift more easily with the back wheels off the ground. Not a practical solution.

I removed the transaxle and removed the cover on my bench to see if there was anything obviously broken or worn. The only thing I found were a couple of 1-2mm pieces of aluminum in the ball bearing detents (which keep it in a particular gear). Looked like pieces from the cover casting. No signs of wear on the ball bearing, or spring. No signs of wear on the shift keys or shift fork.

Grease looks good, no moisture in the case, no signs of wear on any of the gears, and the bearings appear fine.

Transaxle is original and the chipper is a 1990 model. Manufacturer isn't interested in assisting.

I have no idea if there are regular wear parts that need to be replaced. Any ideas are appreciated.

__________________
2009 E320 Bluetec 117,000
1995 E300D 306,000 Sold
1996 Ford Taurus LX 130,000 Sold
1985 300TD Still 225,000 Sold
2016 Ford Fusion 24,900

I would bet that the fine people on MyTractorForum.com would be helpful and courteous.

__________________
1982 300SD " Wotan" ..On the road as of Jan 8, 2007 with Historic Tags

Thanks Fowler. They have a "Look What I Broke Today" discussion forum. That's great.

__________________
2009 E320 Bluetec 117,000
1995 E300D 306,000 Sold
1996 Ford Taurus LX 130,000 Sold
1985 300TD Still 225,000 Sold
2016 Ford Fusion 24,900

Funny how you found that one first.

__________________
1982 300SD " Wotan" ..On the road as of Jan 8, 2007 with Historic Tags