![]() |
new300sdl owner first post
Having been browsing for a bit. New guy here did not see a introduction page . So here goes new to MB diesels.
Picked up a 86 300sdl blowing black smoke yesterday . I made it home ( kansas city and a tad bit north and east ) from OKC late last night . It had blown out the center of 2 glow plugs on the way home . Not a happy drive to say the least .No over heating hard to start . Should have taken a trailer . And another lesson learned . Thankfully family's every couple hours apart along the way. Will need to fix it quick . Rides better than a 62 deuce and a quarter . Cool site . lots to learn . Looking at doing a diesel purge this week first off as been sitting for a bit . |
Quote:
You will want to visit the diesel discussion area, great folks with a seemingly endless reserve of knowledge and patience. Should put valve adjustment on your list. Best of luck with your new acquisition!! |
Quote:
BUY A MAC!!!! :D |
No has to do with a business I once had . Just kind of stuck .
|
Quote:
|
Quote:
|
No valve adjustment on that engine (I believe). Do you mean that the cylinder was open to atmosphere thru the glow plug? Haven't heard of that before.
|
Quote:
At least it was an easy one to check off the list. Dr Mac - here is an overwhelming source of DIY's for these cars. - http://www.peachparts.com/shopforum/general-information/135055-organized-mb-diy-links-2.html whunter has created a beautiful thing. |
Quote:
|
Quote:
|
| All times are GMT -4. The time now is 07:29 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website