|
|
|
|
|
#1
11-29-2004, 10:07 PM
|
|||
|
|||
|
abs lights on
What would cause my ABS light to stay on, only when parking lights or headlights are turned on. 1989 300e
__________________
benzino 
|
|
#2
11-29-2004, 11:15 PM
|
||||
|
||||
|
Charging system fault.
__________________
John Shellenberg 1998 C230 "Black Betty" 240K http://img31.exs.cx/img31/4050/tophat6.gif
|
|
#4
12-06-2004, 01:06 PM
|
|||
|
|||
|
OK, problem solved, found rear driver side brake light bulb burnt out, replaced and abs light on dash went out.
__________________
benzino
|
|
#5
12-06-2004, 01:12 PM
|
|||
|
|||
|
Sounds like your exterior bulb failure monitor light wire is plugged into your ABS light on the cluster!
Had any work done behind the instrument cluster lately? Probably worth addressing so you'll know weather your “braking when slippery” is on or off. http://www.peachparts.com/shopforum/showthread.php?t=71691 (cluster thread)
__________________
-Marty 1986 300E 220,000 miles+ transmission impossible (Now waiting under a bridge in order to become one) Reading your M103 duty cycle: http://www.peachparts.com/shopforum/showpost.php?p=831799&postcount=13 http://www.peachparts.com/shopforum/showpost.php?p=831807&postcount=14 Last edited by A264172; 12-06-2004 at 04:40 PM.
|
|
#6
12-07-2004, 06:47 PM
|
|||
|
|||
|
Thanks for the info, you are correct, the bulb failure light was plug into the abs light and the abs light plug into the bulb failure light.
__________________
benzino
|
 |
| Bookmarks |
|
|
Linear Mode
