|
Bosche KE FI Manual
I have just bought the official Fuel Inj book from bosche and have copied the section that corresponds to my car (KE-3) as well as tuning section into my laptop (good reading on a plane you know).It goes through the parts and explains the operation of each. If anyone out there would like this information I would be glad to provide...my contribution to the most helpful forum on this earth :)
|
I've got an '87 260E, nearly the same car. No EGR. I'd love a copy to my home email. :) nglitz@optonline.net
Thanks very much. If this violates copyright laws in any way :eek: ... well ... I won't tell. :o Thanks, |
Bosch does have the copyright.
|
I do realize that there are copy right issues, but I figure if its not the entire book, I do have the origional and I am not trying to make any money off anyone...it would be considered a dispersion of knowledge :rolleyes:
|
I would love a copy of that I have 2 cars and going to purchase a 3rd. Thanks calrebel@aol.com
|
what does the cover look like? I think I might already have it. Scan the cover if you would.
|
|
Me too. I've a M104.980 engine which I'm pretty sure uses the KE-III injection system.
ndavies.cs@clearstream.com |
I've read through the manual pages. The basics are the same, but the system in my car ('87 260E) is "upside down" from the system used to illustrate the manual. In mine, the airflow is "top down" and moves the flap down with increasing airflow. In the manual, the flow is "bottom up" and moves the flap up with an increase. Lots of excellent information on how the silly thing works & what modifies what signal.
Very useful. Thank you, |
I found it really interesting how everything works...hopefully this can help prevent/shed some light on problems people are having,I knew the system was complex but didnt really know how everything worked. I love technical reading.... :rolleyes:
|
I too would like to join the line. I realze there were several versions of KE in the 80's, so I hope your info covers my system which is a 1987 103.981 (Euro 300SE/126). Thanks a lot.
Gideon |
|
I would love the KE-II section! Where can I get this book?
|
KE Help
I also would like to have an e-mail copy. Thanks
for the offer droederer@cs.com |
|
What is the ISBN number?
|
It is Toyota but could be usefull to understand how things work
http://www.autoshop101.com -> Technical Articles
Technical Articles Toyota Series - Electrical 01 Electrical Fundamentals with questions.pdf file size 401KB 02 Electrical Circuits with questions.pdf file size 319KB 03 Electrical Components with questions.pdf file size 517KB 04 Analog vs Digital Meters with questions.pdf file size 35KB 05 Wire, Terminal and Connector Repair w/qu.pdf file size 270KB 06 Automotive Batteries with questions.pdf file size 741MB 07 Toyota Starting Systems with questions.pdf file size 870KB 08 Toyota Charging Systems with questions.pdf file size 850KB 09 Understanding Toyota Wiring Diagram.pdf file size 1.9MB 10 Electrical Diagnostic Tools.pdf file size 784KB 11 Diagnosing Body Electrical Problems.pdf file size 1.31MB 12 Semiconductors with questions.pdf file size 216KB 13 Transistors with questions.pdf file size 42KB 14 Computers / Logic Gates with questions.pdf file size 205KB 15 Overview of Sensors & Actuators w/quest.pdf file size 287KB 16 Electronic Transmission #1 - Operation.pdf file size 574KB 17 Electronic Transmission #2 - Diagnosis w/quest.pdf file size 287KB 18 Shift Interlock System.pdf 241KB Technical Articles Toyota Series - Engine Performance OBD 20 EFI#1 EFI System Overview.pdf file size 349KB 21 EFI#2 Air Induction System.pdf file size 500KB 22 EFI#3 Fuel Delivery & Injection Controls.pdf file size 727KB 23 EFI#4 Ignition System.pdf file size 435KB 24 Engine Controls #1 - Input Sensors.pdf file size 793KB 25 Engine Controls #2 - ECU/Outputs.pdf file size 495KB 26 Engine Controls #3 - Idle Speed Control.pdf file size 352KB 27 Engine Controls #4 - Diagnosis.pdf file size 446KB Technical Articles Toyota Series - Engine Performance OBD-II 31 Sensors#1 - Mode Sensors and Switches.pdf file size 201KB 32 Sensors#2 - Thermistors with questions.pdf file size 205KB 33 Sensors#3 - Position Sensors with questions.pdf file size 282KB 34 Sensors#4 - Air Flow Sensors with questions.pdf file size 302KB 35 Sensors#5 - Pressure Sensors with questions.pdf file size 261KB 36 Sensors#6 - Speed Sensors with questions.pdf file size 283KB 37 Sensors#6 - Oxygen / Air Fuel Sensors w/ques.pdf file size 328KB 38 Sensors#8 - Knock Sensors with questions.pdf file size 55KB 39 Ignition#1 - Ignition Overview w/questions.pdf file size 239KB 40 Ignition#2 - Electronic Spark Advance w/quest.pdf file size 223KB 41 Ignition#3 - Distributor / Distributorless w/qu.pdf file size 664KB 42 Fuel System#1 - Overview with questions.pdf file size 721KB 43 Fuel System#2 - Injection Duration w/ques.pdf file size 173KB 44 Fuel System#3 - Closed Loop /Fuel Trim w/qu.pdf file size 112KB 46 OBDII#1 - Overview of On-Board Diagnostics.pdf file size 331KB 47 OBDII#2 - Serial Data.pdf file size 289KB 48 OBDII#3 - Data Interpretation.pdf file size 304KB 55 Emission#1 - Chemistry of Combustion.pdf file size 301KB 56 Emission#2 - Emission Analysis.pdf file size 292KB 57 Emission#3 - Engine Sub Systems.pdf file size 180KB 58 Emission#4 - Closed Loop Feedback Systems.pdf file size 233KB 59 Emission#5 - Electronic Spark Advance.pdf file size 130KB 60 Emission#6 - Idle Speed Control Systems.pdf file size 118KB 61 Emission#7 - Exhause Gas Recirculation.pdf file size 227KB 62 Emission#8 - Evaporative Emission Control.pdf file size 148KB 63 Emission#9 - Positive Crankcase Ventilation.pdf file size 126KB 64 Emission#10 - Catalytic Converter.pdf file size 316KB 65 Emission#11 - Secondary Air.pdf file size 107KB Technical Articles Web Series - these are the online instruction modules from this site Control Devices.pdf 190KB Circuit Protection.pdf 683KB Understanding Relays with questions.pdf 550KB Battery Basics v1.1.pdf 531KB Battery Service v1.1.pdf 478KB |
~Jamie
If you do a search on Amazon you under Fuel Injection I believe you can find the book on there. |
|
ke system
I am having trouble with my 87' 300E 103.983. Keeps stalling at warmup. Be helpful if I had info on ignition system.
Thx in advance Vin vjl@aol.com |
|
Yes please!
This information will suit me just fine. I have an 88 300E with some slight problems in the fuel department.
kklav@start.no |
Ditto here,
I kinda feel like I am piling on, but the KE II section would be awsome for both the 86 300E and the 190E 2.3 8v. I'll cover you expenses and hope to return the favor! Scott :rolleyes4
|
1991 300e
Hi, I'm not sure your info will cover my vehicle (1991 300E), but if it does, I would like the information too. Thanks in advance!
|
Send the information to me too please. Thanks a million: Dennis
|
Can you be kind enough to send me this info too. I would like to understand how it works.
ayeldram@yahoo.com Thanks a million |
Anyone who wants a copy, it would be easier to just email me direclty at Brett@teriktech.com. Also the zip file is about 7mb so make sure you have deleted your junk mail and all to make room for the attachment.
|
I'd like to have the section that describe the injection with downdraft air flow meter (KE-Jet) (M103.xxx)
send it to patrik.nilsson(at)tavelsjo.net replace (at) with an @ |
| All times are GMT -4. The time now is 09:18 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website