![]() |
|
|
|
#1
|
|||
|
|||
W124/M103 O2 Sensor R/R - Center console needs removed?
As I ponder this seemingly simple repair, I see the sensor wires go between the carpet and the center console - does the console need to be removed/loosened for this job?
THANKS in advance - Brian |
#2
|
|||
|
|||
![]()
No, just remove the carpet & you can get to the O2 sensor plugs.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
No, you just have to lift up the carpet on the pass side. There is a plastic conduit with the wires inside if I remember right. I know I didn't mess with the center console when I replaced my o2 sensor in my '87 300E.
__________________
2005 Mercedes C230k sport sedan, 6 speed 1987 Porsche 924S - 968-engined track car |
#4
|
|||
|
|||
THANKS everyone and Mercedesshop!
|
![]() |
Bookmarks |
|
|