240d turn signal problems
 

The other day out of nowhere my turn signals stopped working. I checked the fuse and thats not the problem. Is there a common problem with them that i might wanna check first? Also what is the normal operation temp for a 240d just wondering

Thanks a Million

What chassis do you have? I have a 115 chassis 230 gas burner and its turn signals did not work when I got it. I had to get another Turn Signal Relay, mounted underneath the drivers side of the dash near the steering column. I did have a 240D in the 123 chassis, but I don't remember if the relay was in the same place or not. Normal operating temp on my 240D was slightly above 80 degrees Celsius, but would run hotter at 80mph in the summer.

Good call on the relay i bet thats the problem. Ive been running on the line right above the 80 im not sure what temp that is or if im running to warm...

That is the correct temperature for the 240D to run.