Hey there,

I just finished installing my Mosselman turbo kit on my 16V. Everything looks great. I made sure everything is connected right and all the parts are there. However, now my car won't even fire. I turn the key and the starter just turns the crank and the rest of the pulleys that are on the belt. The crank is turning and I can hear the pistons moving, but it sounds like something is screwed up in the ignition system somewhere. Mosselman sent me 4 new Bosch "silber" spark plugs along w/ the kit and they are gapped at 0.60mm. Could this be causing something to go wrong? I would think that at least it would try to fire. It sounds as if the coil is not even working. The engine doesn't even sounds like it is getting any spark. Basically, I'm very frustrated right now and would appreciate if anyone could give me some advice.

test the coil, change it if you have to. sounds like a no spark issue, though are you sure its not fuel related?

Alon

------------------
'92 300CE
Metallic Black (Blue Flaked) on Parchment
Clear Corners
94-95 Tail-Lights
Debadged
Black Grille Insert
16x7.5 Chrome Speedline 5 Star Wheels
79k Miles

Future Upgrades:
Sportline Suspension
17" EVO II's in 7.5" or 8.25" Width
Euro Headlights
Performance Chip
AMG Exhaust
http://home.earthlink.net/~asherson/my92300ce.jpg
Click here to Go To My 300CE Page

Pretty sure it is not fuel related. Because the way it sounds when I try to turn it over. I'm going to test the spark today. Later and thanks for the reply.

Regards,

Clinton Davis
'86 190E 2.3-16V turbo