|
|
|
#1
|
||||
|
||||
C230 Coolant replacement question.
I drained the old fluid from my radiator and replaced it. I did open the heater core before draining. When I refilled, it seemed that the entire 10 liters did not go in although the radiator seems full. Is there a bleeder valve to let the air out or is just filling through the reservoir good enough??
Thanks for any help. |
#2
|
|||
|
|||
You forgot to drain the block. The drain nipple is on the right side of the block; use a 19mm socket to loosen it. It looks like a large brake caliper bleed nipple. If you connect a hose (about 13mm inside diameter) you can do the job without spilling a drop on the chassis or mechanical parts.
|
Bookmarks |
|
|