PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Torque Converter Rotation (http://www.peachparts.com/shopforum/showthread.php?t=111923)

bobkat 01-03-2005 08:23 PM

Torque Converter Rotation
 
Hello everyone! I'm changing my transmission fluid in my 1988 w124, i've drained the pan and i'm trying to turn the torque converter but i can't do it. Any tips on how to turn the converter? I have the car up on ramps and the rear wheels blocked. Thanks for the help!

Ethan 01-03-2005 08:41 PM

disconnect battery,

socket on crankshaft pulley

I've never done it on your model so wait till someone more knowledgeable answers.

bobkat 01-03-2005 08:53 PM

Got it to turn ... just cranked the engine slightly ;-)

JamesStein 01-03-2005 08:54 PM

Thats how I do it. I found turning it with the pry method very difficult. Although now that I think about it, I bet the tranny was in park.. :eek:

C32AMG 01-03-2005 10:37 PM

To avoid damaging engine timing components, such as the chain tensioned and guilds you should always turn the engine in the direction of engine rotation only, the timing chain components were designed to operate in one direction only; and that is engine rotation. I have seen motors with worn timing belts jump timing. Because of the fluid coupling effect, you can a turn the engine and torque converter in park. :)

bobkat 01-04-2005 12:41 AM

oh wow, i had it in neutral with the parking brake depressed pretty hard and wood blocks....anywow got it and drained the torque converter ... it was DISGUSTING smelling, i don't think it had ever been changed since 1988, and it was goopy. Anyway can you guys reccomend a good place for mercedes parts so far www.*************** seems to be the best...

BenzMatic 01-04-2005 02:56 AM

I would think that we should support this forum by buying all the parts from the Fast Lane, the sponsor of this wonderful and great forum. There link is on the top of the forum page, I rather call since Phil gives you very personalize service not very common now a days.
IMHO, It is just not fair to buy parts from some one else, since we get most of our problems resolved by the help of members of this board. So why not help and support the board by purchasig all the parts from Fast Lane. Especially when they are very competitive in price and Phil is the most pleasent and helpful person to talk to.
Disclaimer: I do not have any personal affiliation with the Fast lane but Do have very affiliation with the forum board and want to make sure it is keep running. :sun_smile
Thanks


All times are GMT -4. The time now is 02:33 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website