|
|
|
#1
|
||||
|
||||
Door tumbler problem
My drivers door tumbler wont turn completely to the right.It turns right just enough to lock the door/ activate the servo, but will not turn completely. Also noticed that I cannot push lock down with my hand from inside the car with much ease. Here too though the lock goes down just enough to activate the vacuum servo.
Any ideas |
#2
|
|||
|
|||
Sounds like the door latch itself is the problem, requires removal of the door panel for replacement.
MB number for the latch assembly is 124-720-09-35 & $110 is list
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
Thanks , I'll check that out.
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Running list of failures during 3 years of ownership | Q | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 33 | 01-22-2006 08:13 AM |
240D intermittant starting problem | pj67coll | Diesel Discussion | 12 | 12-13-2003 07:16 AM |
Electrical Problem? | 87300SDLTurbo | Tech Help | 0 | 10-23-2002 02:29 AM |
Igniton switch or Relay Problem | cmusante | Tech Help | 1 | 10-07-2002 06:00 PM |
Paying Labor Cost to look for problem!!!! | Aija | Tech Help | 4 | 07-20-2002 09:13 AM |