PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   89 300SE Bilstien shocks with no dust boot?? (http://www.peachparts.com/shopforum/showthread.php?t=115370)

ken_xman 02-11-2005 10:07 PM

89 300SE Bilstien shocks with no dust boot??
 
My new Bilstiens shocks for the W126 have no dust boot...... is this normal??
The KYB's in there now do.
Are these the wrong shocks, or is the boot a seperate item???

Chevota 02-11-2005 10:41 PM

No boots are ok. I usually pull them off if they have 'em.

ken_xman 02-11-2005 10:47 PM

If I want them before I install the new blisteins how can I get some to fit.
Will universal boots from a local speed shop fit?

deanyel 02-11-2005 10:50 PM

Boots are separate - should be able to get them from the same place you got the shocks.

Chevota 02-11-2005 11:05 PM

The only boots I've seen sold seperate were in off-road shops and are designed to fit cheap generic shocks like Rancho.

Can you use the old KYB boot? I just tossed out some shiny new Bilstein boots too.

ken_xman 02-11-2005 11:07 PM

The KYB boots are rusted very badly. Too bad you just ousted the bilstien ones.
Anyone else have a set?

Chevota 02-11-2005 11:10 PM

Would it kill you to run without?

ken_xman 02-11-2005 11:25 PM

Chevota,
Having lived in San Diego for a few years, the issue with no dust boots in cali is really a non- issue..... you are correct.
But, in the northeast, the boot keeps the snow and frozen sludge off the shock piston. Especially if I am planning on leaving the car outside when it gets completed. Having 4 cars and space for 2 indoors leaves me to become anal with sealing everything up best as possible.

Chevota 02-11-2005 11:32 PM

Ok, I see your point. I've never seen a bilstein shaft rust like a regular shock so I think they may be stainless??
So where did you get them? All the ones I've bought that were for a specific car had a boot. The universal shocks I've bought do not. Maybe the seller or Bilstein can make it right?

ken_xman 02-11-2005 11:44 PM

I ordered them through adsitco.com for $48 each.
It was a good deal...... well before the boots. Yes I will have to call them, they just arrived tonight.

ken_xman 02-14-2005 11:00 AM

Anyone have these boots in their spare parts bin.

Chevota 02-17-2005 04:01 PM

If you tell me the diameter of your shaft, body, and minimum length you need, I'll keep an eye out.
That sounded kinda gay didn't it...

ken_xman 02-17-2005 04:12 PM

I will turn away when you ask me to cough.
Actually..... I called the supplier and they are shipping me the covers and charging me $15...each +shipping....
oooouch. I asked if they were sending me temporary tatoos of boobs for my back? He didn't get it.


All times are GMT -4. The time now is 10:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website