![]() |
|
|
|
#1
|
|||
|
|||
Identity of Hose
There's a hose/tube that's going from my brake booster, crosses over the engine and enters into an area to the left of the engine. Sorry, that's not very descriptive but maybe you clearly would know. Feel free to point me to a diagram of a 1970 280SE Benz engine and that'd be helpful. Thanks!
|
#2
|
|||
|
|||
hose
are you talking about the brake booster hose? does it connect to the intake manifold?
|
#3
|
||||
|
||||
Most likely the vacuum line to the brake booster. There is also a check valve.
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
#4
|
|||
|
|||
Is it this one? Vacuum line.
|
#5
|
|||
|
|||
Yup That's It!
Thanks for your help!
|
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Self level suspension hose warning | Greg in Oz | Tech Help | 6 | 07-06-2007 05:45 PM |
Weeping Brake Fluid from Braided Hose at Reservior | PatrickW | Diesel Discussion | 20 | 02-16-2007 06:06 PM |
Question about hose from radiatior to thermostat housing | JimSmith | Tech Help | 2 | 03-22-2004 12:01 PM |
W124 300D 2.5 Turbo Breather Hose Issue | Chris Blanchard | Diesel Discussion | 5 | 06-04-2003 05:47 PM |
Vac. hose identity | Wallknight | Diesel Discussion | 7 | 07-01-2002 01:42 PM |