lower door trim removel??
 

1991 sel 420....need to find out how to remove the lower plastic/rubber? door trim on outside of driver door. would like to repaint the door but am not sure if the inside panel must come off to unfasten the outside trim. any help would be appreciated. :)

Jack, I suspect that the lower cladding is the same as the 124 cars. Remove the screw at the bottom rear edge of the cladding. Next pull/pry the bottom edge to release the white plastic clips. After the bottom of the cladding is free slide the cladding panel toward the rear of the car to release the top clips. Expect to replace some/all of the white plastic clips before you reinstall the cladding as they are brittle and many will break during the removal process.

1991 420 sel door molding
 

Thanks so much for the quick help on my problem.....on track i think, will look a little closer when i get some free time...thanks loads. jack