Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-29-2005, 02:21 AM
Registered User
 
Join Date: May 2005
Posts: 1
Unhappy key issue

I bought my 1998 ML320 last summer and absolutely love it. Last week both keys simply quit working. The engine turns over but quits immediately. I am told Mercedes will only issue 8 keys to each vehicle and mine are the last two. If I want to drive my car I must install a complete new ignition system (approx. $1900). This is suppose to be a safety feature....can anyone give me any insight as to what I could do? In my opinion it is a manufacturers defect, and I cannot order another key. I have called the 800# and they said they are sorry but all 8 keys are already used up (I got the last 2). HELP!

Reply With Quote
  #2  
Old 05-29-2005, 07:05 AM
Registered User
 
Join Date: Apr 2005
Posts: 10
Havent' you talked to a dealership. My understanding is that they can deactivate the keys and re=issue them. May be somebody else can chime in...
Reply With Quote
  #3  
Old 05-29-2005, 09:05 AM
ILUVMILS's Avatar
Senior Member
 
Join Date: Sep 2002
Posts: 3,066
Unfortunately once all eight keys have been used you have to replace some pretty expensive parts. Personally, I think it's a lousy deal but there's no way around it. I'll try to keep the explanation simple. The AAM is the control module that, among other things, verifies that the correct key/transponder is being used to start the vehicle. It does this by reading the chip which is embedded in the transponder. If you look at the ignition switch you'll notice a plastic ring around the key hole. This appears to be ornamental but it actually gets powered up by the AAM when the key is switched on. The chip in the key is turned on inductively and sends a coded message to the AAM. The AAM verifies that it's the correct key and sends another signal to the ME-SFI control module. ME-SFI controls engine mangement. Once ME receives the start authorization signal from the AAM it sends the appropriate signals back to the AAM to energize the fuel pump and starter relays. As you can see, MB made it pretty difficult to defeat this system.


Now, here's where it gets confusing. When an AAM is replaced, the dealer receives a "dumb" one. In other words it won't work until it's been learned to the vehicle. The way it's learned to the vehicle is simple. The AAM also includes a "workshop" or "single use" key. This is just a regular blade key, not a remote key like you already have. This key has a chip embedded in it as well, but this chip contains ALL the vehicle information for all eight keys assigned to the vehicle. When this key is put in the ignition switch and turned on, the AAM reads all the information from the chip and will now work with any key assigned to that vehicle. The problem here is that when all eight keys have been used, MB will not supply a "workshop" key identical to the original keys. The entire vehicle lock set must be replaced. This is around $500.00 if I remember correctly. The AAM and ME-SFI control modules also have to be replaced. This is why it's so costly.


I sympathize with your predicament but please don't beat up your dealer. They can't do anything about it. I've been in this situation before and believe me when I tell you that I didn't enjoy taking $2000.00 from a client who only owned their ML for about two months.


The only words of caution I can give you are to have your dealer make sure the problem isn't something as simple as the DAS ring around the ignition switch or the immobilizer, which the ring connects to. These parts are inexpensive and can cause the symptoms you describe. I'm actually suspicious because you say that both keys stopped working at the same time. Something tells me that your keys are OK. Let us know what happens.

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
190E URGENT!!Please help with Ignition lock!!!! vanakin Tech Help 31 02-11-2011 11:51 AM
96' E320 Metal Key will not spring out cpiad2005 Tech Help 0 02-07-2005 12:16 PM
please help me diagnose a no start issue. 300SD(long) RG5384 Diesel Discussion 8 06-14-2003 11:55 AM
removing old 300e tumbler pieceofcrap300e Tech Help 2 04-18-2002 10:11 PM
Alarm system or key issue? Crowe Tech Help 10 07-16-2000 08:15 AM



All times are GMT -4. The time now is 02:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page