![]() |
Immobilizer problem
Car is a E320 1994 with switchblade remote control. I stop the car whit out locking it with the remote and when i try to start the car it wont start, starter will not turn and when I try to use the remote the lights on the door and the trunk will not light at all new battery in the remote so thats not the problem and the battery in the car is good to.
|
remote control
Hi On your veh if you lock the car with the blade key it will not start,are your doors locking and unlocking with the remote,if not you will have to resynchronize the infrared remote to the immobilizer and the central locking system.I would aim the remote at the inside mirror were the red and green lights are press the remote once then place the key in the ignition switch and turn to position 2 and press the remote bitton again turn off and remove key close door standing out side press the remote to lock and unlock doors then see if it starts if not send me your fax # and i will send you a copy of how to test the remote and system.joeym
|
Problem solved fuse oxidation
|
remote key
Hi Was it the fuse for the CLS.joeym
|
The fuse is B and the fuse to the centralocking goes to the immobilizer system too.
|
| All times are GMT -4. The time now is 11:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website