![]() |
HELP 1991 300SL Hard Top Won't unlatch
Hi I am a newbie and just purchased a 1991 300SL and I can't get the Hard Top to unlatch.I spoke with a Benz guy on the phone and he mentioned that if the car was sitting for a long time and the battery was dead that the alternator needs to be at a certain voltage to unlatch the top.It sucks down but won't release.has any one had this problem or maybe can advise? I put a volt meter on the battery and when the car is running it is only charging at like 13.5 volts.
|
To release the hardtop you must pull back on the "top" switch with-in 10 seconds of turning on the ignition switch!
IF that doesn't work YOU should read owners manual on "emergency" operation of the soft-top. THERE should be a special tool to release the top at the front & at the rear (1 tool). |
All times are GMT -4. The time now is 11:26 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website