security alarm failure 1991 420 sel
 

Evidently my alarm system, conected to the autolocking system (fuse 17) ,as failed..erractic cycling of horn blowing when driving along. Very distressng! Has stopped with removal of autolock lock fuse. I believe the master control box lives under a floor board on right side passanger floor. Can anyone furhter guide me to disconnecting this box until I can get a replacemnt so I still have the ability to lock the card? (replace fuse 17) Thank you.

I had familiar problem with my alarm on 420sel. I ended up disconnecting alarm module. Its located in passenger foot area. Lift passenger side carpets. Youll see plastic cover like fake wall. There is plasic nut or screw in the center bottow of cover. Remove it. Then remove plastic cover. You will see couple of black boxes and O2 sensor connector. On mine alarm module was marked as Bekker Autoradio(I know its weird but it was alarm module). There is plug on its side. Disconnect it and alarm will disable. I had no problems with my radio nor central locking system with module disconnected. I hope it helps.
Good luck

to victor300e
 

thanks you so much for your prompt help with my problem. apparently all now solved I can dreive it to the dealer (90 miles) without the horn periodically blarring! Again thanks so much. cdegroot