|
shock mounting bold stripped on lower rear 380sl
When I installed new rear shocks on my 380sl I stripped one of the lower bolts that holds the shock in. How do I get the bolt out and replace it with a new one. I know it comes out because mercedes sells a special bolt for it?
|
not sure
what your configuration is but you can often drill out with a drill that is a little smaller than the center of the bolt, then tap the threads clean with a tap.
be careful and meticulous and you should be ok. good luck tom w |
| All times are GMT -4. The time now is 04:17 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website