Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-21-2005, 01:40 PM
enochbell
 
Join Date: Jun 2005
Location: Atlanta
Posts: 60
ac compressor clutch, '98 E320

First, the simple questions: Is it prudent to replace just the compressor clutch on a '98 E320? All of the parts sources I can find are clutch/compressor units. If I can replace just the clutch, does anyone know a source for the part?

Second, there is a good part of the story, it's one reason I keep buying and driving Mercedes:

Just did a long drive (1,000 miles) in very hot conditions, got to destination and noticed a bad "bolt in a tin can" rattle from front of engine. Turns out it was the chain tensioner, which was visibly dancing on the reverse-threaded spindle. In Hilton Head, without tools, pulled into the dealer there (Modern Classic Motors) at 4:30 on Friday. The service manager and tech, even though both were as busy as you can imagine on Friday near closing time (even busier than you can imagine: there had just been an armed robbery of a nearby bank and the getaway car was an ML!, detectives were swarming the place), took the car in straightaway. A quick search turned up a new tensioner, I'm looking at maybe $300 plus $200 labor, so I sit down to moan about not being able to fix this myself. 30 minutes later the tech drives my car back around, hands me the keys and says all is good. I go for my wallet, and he says no, thanks, welcome to Low Country and Hilton Head: no charge! Apparently the retaining nut on the spindle had come loose and set itself free somewhere on I-75 in Georgia. The tech pirated a nut from the new tensioner (it is a special reverse-thread 9.5 pitch one-off), installed it and said he was just glad to save me some money. True story.

Now the bad part: the tech said that I would soon need a compressor clutch, it was making a faint rattle that was masked by the tensioner. His opinion: no problem to make it the next 1000 miles, but it would need to be replaced soon. Got back to Atlanta and the thing is now making a very loud chatter. AC works fine, but is better at low speeds, consistent with clutch slipping. Which leads me to the questions I asked at the beginning of this diatribe.

Thanks for your advice,

Greg
__________________
64 230sl, my daily driver
94 E500, sold
98 E320, family and dog hauler
04 C240, safe machine for teen drivers, but a poc
08 audi a4, yes we have gone to the dark side
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
E36 versus E320 Air Box Questions (W124/M104) Greg in Oz Mercedes-Benz Performance Paddock 19 01-25-2009 06:04 AM
My E320 is magnifgicent. ksing44 Mercedes-Benz Performance Paddock 9 04-03-2005 08:37 AM
Isn't the 96 E320 and the 94-95 E320 basically the same car? jrmd01 Off-Topic Discussion 8 08-26-2004 12:12 AM
Help! Will 2003 E320 factory rims fit my 1998 E320? sblanken Mercedes-Benz Wheels & Tires 1 07-25-2003 09:18 AM



All times are GMT -4. The time now is 09:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page