|
|
|
|
|
|
#1
|
|||
|
|||
|
Anther AC Problem for 300E
I have a 1986 300E. The AC works great when the wheel for the temperature setpoint is set to the coldest setting. If the wheel is any other position the center vents close and I have hot air blowing out the side vents. At first the AC worked fine for about 10 minutes after you started it up. Then the center vents would close and the heat would come out of the side vents. Is it one of these pods going bad? Thanks for your help.
Bill Last edited by wcpease; 08-22-2005 at 08:20 AM. |
![]() |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Running list of failures during 3 years of ownership | Q | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 33 | 01-22-2006 08:13 AM |
| HELP! 93 500SEL low power problem | Mercedes500sel | Tech Help | 8 | 08-18-2005 12:54 AM |
| 240D intermittant starting problem | pj67coll | Diesel Discussion | 12 | 12-13-2003 07:16 AM |
| Electrical Problem? | 87300SDLTurbo | Tech Help | 0 | 10-23-2002 02:29 AM |
| Igniton switch or Relay Problem | cmusante | Tech Help | 1 | 10-07-2002 06:00 PM |