Alert; You don\'t have to screw with bumper

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
Alert; You don't have to screw with bumper

LinkBack

Thread Tools

Display Modes

09-06-2005, 11:08 AM

KATSCAN

look to the cookie

Join Date: Aug 2005

Location: Pensacola/south carolina

Posts: 106

Alert; You don't have to screw with bumper

Just wanted everyone to know that it's tough drilling that first screw into that clean bumber. Well, you don't really have to. Turns out that the holes in the newer mercedes bumpers accept a plastic rivet (I purchased at lowes).
Remove the rivet from it's base and press into the bumper. Might want to use washer on standard plates, but I drilled a small enough hole on my euro plate so no washer was needed.

Attached Thumbnails

Alert; You don't have to screw with bumper-100_3682.jpg

Alert; You don't have to screw with bumper-100_3683.jpg

__________________
JHaburay

1972 280se 4.5 "princess"
1986 2.3-16v first 100 (099) USA

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rear bumper glued to 123???	janko	Detailing and Interior	6	02-22-2013 08:11 PM
bumper hitch on 300TD?	odie	Diesel Discussion	22	11-01-2004 05:02 PM
Rear Euro Bumper mounting	turbodiesel	Diesel Discussion	14	10-18-2004 11:35 AM
Rear Bumper (fell off)	floydo	Diesel Discussion	12	04-06-2003 09:01 PM
Help!!! Thermostat Bleed Screw	Agron80	Tech Help	1	08-01-2000 09:07 PM

All times are GMT -4. The time now is 05:11 PM.