![]() |
|
|
|
#1
|
|||
|
|||
1981 240d WIERD
Ok i installed a subwoofer in the back of my 240d and i had to drill a 3 inch hole in carpet through the metal into the trunk for it to sound right. before i drilled i checked to see if anything was gonna be in the way and there was one thing... a plastic bubble thing... its about 2 feet long and 1 and a half feet wide and it goes right into a spot on the roof of the trunk. there was a tube connected to it and when i cut it air hissed and then stoped... when the car is on the tube connected to the plastic bubbles sucks in air. what the heck is this thing and do i need it? can i just cap off the tube and call it a day or is it actually important
|
#2
|
|||
|
|||
That's the vacuum tank. It's function is to retain vacuum when the engine isn't running, this will allow the automatic door locks to work when it's not running.
|
#3
|
|||
|
|||
sooo do i need it? and if so how do i put the line back together?
|
#4
|
||||
|
||||
take
a piece of pipe a size that will fit inside the tube tightly and push it into the two ends of the vac line. done.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual. ![]() ..I also have a 427 Cobra replica with an aluminum chassis. |
#5
|
|||
|
|||
uhh.. will rubber shrink wrap work? like cut a peice 2 inch long stick 1 inch on one end and the other inch on the other end and take heat gun to it and shrink it on
Also anyone this is to anyone that has the 240d, do you find the vacuum lock a useful feature or could you do with out it. cause i think it looks very ugly and it uses up trunk space... |
#6
|
||||
|
||||
i am not sure if shrink
wrap will work or not.
personally on my old benzes the vac locks are mostly dead. they are nice when working but not worth the trouble to fix when dead...to me. tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual. ![]() ..I also have a 427 Cobra replica with an aluminum chassis. |
#7
|
|||
|
|||
Quote:
Quote:
|
#8
|
|||
|
|||
hehehe it was installed correctly just i needed the subwoofer to sound right so i had to take it out. i guess ill put it back in just because. ty for the help.
|
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dash Electrical Probs 1981 240d | yawaben | Tech Help | 3 | 08-22-2005 02:09 AM |
Nov. 1981 Car & Driver 240D Advertisement FREE SCAN! | cgryphon | Diesel Discussion | 5 | 04-03-2005 10:00 PM |
1981 240d vacuum photos anyone?? | IZELJIC | Diesel Discussion | 1 | 03-17-2005 01:32 PM |
1981 240D parts available for cheap | adamb | Diesel Discussion | 0 | 06-04-2004 09:12 PM |
looking at 1981 240d purchase | dwcasey | Diesel Discussion | 9 | 02-07-2002 12:54 PM |