PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   W126 Under Engine Splash Shield (http://www.peachparts.com/shopforum/showthread.php?t=133593)

wbain5280 09-08-2005 05:24 AM

W126 Under Engine Splash Shield
 
Do the W126 cars come with a splash shield under the front of the engine compartment? It looks as if there should be one but there isn't on mine. The W126 service CD shows there is for the W124.

420 SE 09-08-2005 06:10 AM

I don't have one on my 420 SE

Cheers

Gary Ganaway 09-08-2005 08:05 AM

I also do not have one on my 85 380 SE

t walgamuth 09-08-2005 08:32 AM

i dont
 
but it looks like i should have one on my 90 350sdl. my 84 sec looks like it didnt have one.

tom w

kennysin 09-08-2005 08:52 AM

Yes. I installed one on my 1983 280SE, and on my brother's 300SE. It is available in plastic or metal form, and it screws directly under the front of the engine to pre-drilled mounting points. However, it usually gets misplaced after some years in the workshop when someone or other forgets to put it back after a service, and the owner doesn't bother checking.... :(

Dave Horvath 09-08-2005 03:17 PM

My 89 300SE has one on it. The dealer lost it once and I made them replace it. It looks like someone lost it on my 91 190.

Mike Murrell 09-09-2005 03:13 AM

Your '89 300SE should have a large encapsulation panel underneath. With it removed, you can access things like the alternator from underneath and the engine oil drain plug.

The panel is held in place by 4 sheet metal type screws that have an 8mm head.

I searched this sites parts dept. for one and didn't see it. This is one item I wouldn't have a problem obtaining from a junk yard. I suspect that if it's a dealer item, you'll pay dearly for it.

Here's a photo of the screws:

http://catalog.eautopartscatalog.com/smittys/sa/wizard.jsp?partner=smittys&clientid=sasponline.com&baseurl=http://www.sasponline.com/&cookieid=1LZ04S61F1LZ04SFTT&year=1989&make=MB&model=300-SE-001&category=Y&part=Screw

wbain5280 09-09-2005 03:37 AM

Thanks guys. It looks like there should be one, there are short plastic vertical pieces attached to the frame rails but no horizontal panel.The splash shield would extend the life of the serp. belt too.

danwatt 09-09-2005 03:56 AM

Mine came without, but since it's been summer I haven't had it on. Once the rain starts, I'll put it back on. Also, if anybody has a lowered car, it's a really good idea to keep the panel. Keeps your oil pan safe.


All times are GMT -4. The time now is 02:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website