|
|
|
|
|
#1
08-28-2005, 01:55 PM
|
||||
|
||||
|
Help with w201 190e transmission flange removal
The flex disk on our 86 190e 2.3 disintegrated while driving and caused some damage to the transmission flange/bolts. I ordered a new flange (as the original is bent out of shape) and recieved it only to find that the holes don't line up with the flex disk. I called Phil and the local MB dealership where they both told me that there was only 1 flange available for the w201. More trouble: The bolt on the transmission flange (pictured below) seems to be a specialty tool, from my searching it seems to be a 29mm (deep socket). Can anyone confirm that this is the correct size? Where is the best place to purchase such a tool?
Thanks!! Transmission Flange Picture
__________________
Daily Driver: 02 E430 4MATIC In the family: '03 E500 // '04 ML500 // 64 220SE 
|
|
#2
09-09-2005, 01:14 PM
|
|||
|
|||
|
Transmission Flange Removal Socket- 190E
Skier3_9, the nut is NOT a 29MM. You need a 30MM deepwell, 12 point socket. I ordered mine from Snap On - P/N SK30 and it fit great. Good luck.
|
|
#3
09-09-2005, 01:32 PM
|
|||
|
|||
|
got mine from KD.
__________________
'82 300SD - 361K mi - "Blue" "Good judgement comes from experience. Experience comes from bad judgement." listen, look, .........and duck.
|
|
#4
09-09-2005, 02:05 PM
|
||||
|
||||
|
Sears has an excellent selection of single sockets -- you'll likely find one there. I've also found that True Value Hardware carries a decent selection.
Also try auto parts stores. That sounds like it's close to what they might be selling as a wheel-hub socket for foreign cars. They'll have several sizes... you may find just what you need. Good luck. Jeff Pierce
__________________
Jeff Pierce Current Vehicles: '92 Mercedes 190E/2.3 (247K miles/my daily driver) '93 Volvo 940 Turbo Wagon (263K miles/a family truckster with spunk) '99 Kawasaki Concours Gravely 8120 Previous Vehicles: '85 Jeep CJ-7 w/ Fisher plow (226K miles)'93 Volvo 940 Turbo Wagon '53 Willys-Overland Pickup '85 Honda 750F Interceptor '93 Nissan Quest '89 Toyota Camry Wagon '89 Dodge Raider '81 Honda CB 750F Super Sport '88 Toyota Celica '95 Toyota Tacoma '74 Honda CB 550F
|
|
#5
09-09-2005, 11:20 PM
|
||||
|
||||
|
Quote:
__________________
Daily Driver: 02 E430 4MATIC In the family: '03 E500 // '04 ML500 // 64 220SE
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 190e transmission hard shift | Tom190e | Tech Help | 4 | 05-10-2005 10:04 PM |
| 190e dashboard removal !!! | roberto | Tech Help | 7 | 12-02-2003 01:31 PM |
| CORRECT part # needed for 190E (W201) euro headlights | frosty | Tech Help | 10 | 08-17-2003 02:32 AM |
| Is there a trick to adjust the transmission vacuum modulator on a 190e | Meza | Tech Help | 1 | 08-09-2003 01:05 AM |
| 17x8.5 BBS approved wheels on a w201 190E | Chiragp | Mercedes-Benz Wheels & Tires | 1 | 04-17-2000 08:45 AM |
Linear Mode
