![]() |
Rear parktronic 2000 s class not working
I have a 2000 s-class and the front parktronic works fine however the rear does not. As it says in the manual when it does not work you get the red segemnts and a tone. I found one of the rear sensors pushed in the hole and it had a large scratch across the lense. As a test I took a piece of masking tape and taped over a front sensor to see if it would give me the same red segements as the rear. When I put it in drive I did not get the malfunction indicator of the red segment and tone for hte front. Could the sensor I found pushed in and scratched cause the rear to be inop
Thanks for any help |
One or more sensors most likely has an internal fault. PTS sensors do not
take kindly to being hit or scraped. Your MB dealer can run a SDS short test for codes. The offending sensor will be identified by the computer. They can test all the others for accuracy as well. Regards, Dr.D |
All times are GMT -4. The time now is 04:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website