Can anyone tell me which wires go where on the new six pin connector? I plan to hook up the city lights and all...

Thanks,

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]

Put pin 2 (brown wire) into socket 2
Put pin 1 (green wire) into socket 6
Put pin 3 (yellow wire) into socket 5
Put pin 4 (white wire) into socket 4

City light is socket 3

Awesome!

How/where do I hook up the city light? I have an extra pin for them...

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]

The city light ties into the corner lights. Connect to the wire for the running light filament in the corner marker plug. On some MB's it's a grey wire and has a different color stripe on the left and right side.

My kit came with a a wire with pins on both ends that you simply cut in half to attach.

Bill

__________________
_______________________________________
1988 MB 560 SEL 138k - Desert Taupe w/ Cream Beige Interior.

Mods:
Euro Headlights w/Smoked Corners
New seats from a `91
ASA 15-Hole Replicas
Sony HU, JL Audio 400/4 Amp, JL Audio 2-way Components on rear deck, JL Audio 3-way Components in door & dash.


2000 BMW Z3 2.3 Roadster 33k
2002 Toyota Rav4L 50k

Ah I figured them out once I had the lights installed, now I have to order the correct wiper arms. Purchased the wrong ones. At least I have the proper trim panels as well as motors.

__________________
I'm not a doctor, but I'll have a look.

'85 300SD 245k
'87 300SDL 251k
'90 300SEL 326k

Six others from BMW, GM, and Ford.

Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]