|
|
|
#1
|
|||
|
|||
park sensors 92 300se please help
Hi i have just purchased a 92 300se w 140, it has a non genuine sterio, i have a boot full of cut wires from the old system, how do the park sensors work?
They go up when i put it in reverse but there is no wirering connected to them, i have removed one and cant see where anything to plug any wires to it. how do they work? help please Mick p |
#2
|
|||
|
|||
The park sensors are driven off the "lock, lumbar, etc. pump" under the passenger rear seat. Vacuum and pressure, the input comes from the reverse switch to the pump
|
#3
|
|||
|
|||
Re sensors
Quote:
I know how they go up and down, that works fine. Im trying to work out how to connect them to my sterio so i can hear them Thanks mick p |
#4
|
||||
|
||||
Hhmmm....
My guess is that you have confussed the rear electric pop-up masts, located at each rear corner on early W140s with the "Parktronic" system, option installed on W140s from 1996 onward. The Parktronic system emmits a warning tone and shows how far an object is from the car with a series of warning lights, all of these done from a series of radar sensors located on both, front and rear bumpers. The rear pop-up masts which raise when reverse is engaged do not emmit or send any sound, they are just a visual aid to the driver to help locate the rear corners of the car when backing up.
__________________
A. Rosich CL 500, 1998 S 500 L, 1998 E 320 T, 1995 [Sadly sold ] |
#5
|
|||
|
|||
Re park sensors
Quote:
I dont need to spend anymore time trying to work it out I will install some sort of rear park sensors because i find hard to park in the city. Thanks again Mick p |
Bookmarks |
|
|