|
|
|
|
|
#1
02-19-2006, 08:22 AM
|
|||
|
|||
84 500 sel Euro trans rebuit or used?
need to replace the tranny should i go rebuilt or used every one telling me(bone yards) that it must come from a 84 or 85 500 sel is this true?could it be the B-2 piston the car started moving like it was in neutral on take off then it would go third and forth were fine it was also making a rumbling noise during the take off fluid level looks a little high now the car wont move foward in d ,2,1 but rev works fine any tips help appriciated thanks
Last edited by mtmacklin; 02-20-2006 at 07:05 AM. Reason: no response 
|
|
#3
02-20-2006, 10:40 AM
|
||||
|
||||
|
Not a big fan of used..You can use transmissions from 380's, 420's, 500's, 560's etc.. even E500's and 500SL's, S500's (early boxes) will work just fine.
There is a very good chance it is your B2. Seeing as you will have to drop the box one way or the other might as well get her out and have a look. The B2 can be done in the car but it is a PITA... I'd wager if you did a search you would find directions on how to do it. if you can't find them here I know they can be found over at mbcoupes.com Jonathan
__________________
Blue Ridge Mercedes Jonathan Hodgman http://www.blueridgemb.com/ Enthusiast Service, Restoration & Tuning. Follow Us on Facebook! Located in the Atlanta area Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines. Mercedes Repair Atlanta
|
 |
| Bookmarks |
|
|
Linear Mode
