![]() |
REcharging 123 A/c system
I have an a/c information leak in my head from reading so much about car a/c!:eek:
Anyway, my question is about how much oil to put in my 1983 240D. I have a new compressor, dryer and expansion valve and am going to flush the system with mineral spirits and a air compressor before reinstalling. Yes, I got a NEW R4 compressor, not a rebuild. And I am using R12 - I HAVe 5 cans of it and a quart of mineral oil. The mercedes manual bit about aC specs is at this page - http://skinnerbox.steaky.org/Service/W123/Index/Groups/83ClimateControlSystem.htm click on job 83-520 to see the specs. I don't understnad what it is saying. How much oil should I put where???? Yikes, I though this would be easier than this! If it s a new compressor, put 8oz in the compressor and 4 in the drier and be done with it?? Cheers! |
according to mercedes 123 climate control book compressor should have 170cc (aprox 4 oz) I couldn't find the spec for the dryer but aprox 4 0z in there as well will be plenty. don't add too much or performance will suffer.
|
Worse than performance suffering...you could slug the compresser with oil that won't compress and destroy it if you put too much in....how much exactly would that take? I can't answer that.
|
| All times are GMT -4. The time now is 04:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website