![]() |
How to: 190E fuel injector replacement
I replaced the injectors on my 1992 190E today, and made a website documenting how it was done:
http://190Einjectors.homestead.com/index.html Mike |
Mike,
That looks like a good write-up. Why not post it on this site's wiki? cheers, dan r. |
Did it make any difference?
Great website.
How are the reults? Tom |
When I replaced ours, I noticed no significant difference - despite a home-brew testing apparatus I used that seemed to indicate some had a faulty spray pattern. Much, much later, we did have a problem (running on 3 cyl) that I narrowed down to one of the new injectors haveing failed - probably clogged. I still had the old ones, so it made that diagnosis much easier, and it's still running fine a year later with one old injector.
Since the injectors a relatively cheap for this model (here, at least), it pays to have a couple spares on hand. Steve |
Regarding the results from putting in the new injectors, I would say there has not been a tremendous difference, but the idle is smoother now if I watch the tach needle at a red light for example. It's much more steady. I don't think my old injectors were all that bad, but I just feel better putting in fresh ones now that the car has 140,000 miles.
Mike |
All times are GMT -4. The time now is 10:20 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website