![]() |
1989 300E Instrument Cluster Problems
My 89 300E instrument cluster is not working. When I start the car the gauges are not working (ex: speedo, rpm, oil pressure, etc...) none of the warning lights work either. The only thing that works on the cluster are the signal and hazard lights. I checked all the fuses and they are in working order.
Please help!!! Fab |
change out fuse #5 anyway...(8amp white)
|
I changed the fuses and still nothing. Could it be anything else?
Fab |
recheck seating on #5 fuse and all others in the box.
there's also a rheostat(trip meter reset) I believe. I found a post in the archives that pointed to a blown rheostat. |
Be SURE the fuses are OK.
Mine did the same thing once. I thought the fuses were fine, too. However, one fuse looked ok but it was actually physically broken...a hairline crack. I would say which fuse but I don't remember. |
And another happy "Fuse 5" replacer
Just adding to this thead that I too had the "gauges out and funny buzzing from behind panel except when turn signal in use" problem on my 1986 300E, and I too had visually examined all my fuses very closely in good light and thought they were all OK, but changing number 5 (which fell apart after removal) solved my problem.
|
Check post #5 in thread in link, it may help.
http://www.peachparts.com/shopforum/showthread.php?t=159843&highlight=red |
All times are GMT -4. The time now is 03:05 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website