Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-28-2006, 07:15 PM
bcm bcm is offline
Registered User
 
Join Date: Nov 2005
Posts: 91
oil pressure?

my 190 88 2.3s oil pressure reads high even at cold start in the morning and 2cm difference when hot. Is this norm/ If not what can be done. I had the oil changed 700ml ago.

Reply With Quote
  #2  
Old 03-28-2006, 07:41 PM
Hirnbeiss's Avatar
ich fahre, also bin ich
 
Join Date: Mar 2002
Location: South Florida
Posts: 1,671
Sounds normal

Cold oil is more viscous and will produce a higher pressure due to flow resistance.
Normal oil pressure at idle when hot is in the lower 1/3 to 1/2 of the oil pressure gauge.
Tom
Reply With Quote
  #3  
Old 03-28-2006, 07:49 PM
bcm bcm is offline
Registered User
 
Join Date: Nov 2005
Posts: 91
So my guess too is that 10w40 is too thick;if so whats a weight?
Reply With Quote
  #4  
Old 03-28-2006, 09:01 PM
carson356
Guest
 
Posts: n/a
does it go up with the key turned on and the engine off? if it does, the pressure sender need replacing.
Reply With Quote
  #5  
Old 03-28-2006, 09:18 PM
Ali Al-Chalabi's Avatar
Senior Member
 
Join Date: Nov 2000
Location: Knoxville, TN
Posts: 1,837
The oil pressure should be high when it is cold started. Unless you in in some frigid climate, 10w40 be fine.
__________________
Ali Al-Chalabi

2001 CLK55
1999 Dodge Ram 2500 Cummins Diesel
2002 Harley-Davidson Fatboy
Merlin Extralight w/ Campy Record
Reply With Quote
  #6  
Old 03-29-2006, 12:07 AM
86560SEL's Avatar
Registered User
 
Join Date: Jan 2003
Location: east Tennessee (southeast USA)
Posts: 3,015
I actually have 20W-50 in mine. I had 15W-40, but switched to thicker oil.

Mine is around "1" at hot idle (in park), but when it drive, it it rather low. Around .2-.3 when engine temperature is 100*C and in drive. Manual states that .3 at hot idle is OK. ??

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page