|
|
|
|
|
#1
04-23-2006, 12:31 AM
|
||||
|
||||
M116 headbolt size?
Can anyone tell me what size socket I'll need to remove some heads from a 380 motor?
Thanks 
__________________
I'm not a doctor, but I'll have a look.  '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] 
|
|
#2
04-23-2006, 02:53 PM
|
||||
|
||||
|
If the cams are on you'll need the offset M116/7 head bolt bit. I lent mine out more than 5 years ago and forgot who I lent it to
 IIRC it's an 8mm hex.http://www.samstagsales.com/mercedes/mb116589001300.jpg Sixto
|
|
#3
04-24-2006, 04:59 PM
|
||||
|
||||
|
Maybe I'll pull the cams first then.
 Looks like a spendy tool for one job.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]
|
|
#5
04-24-2006, 07:17 PM
|
||||
|
||||
|
What's needed to pull the camshafts?
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]
|
 |
| Bookmarks |
|
|
Linear Mode
