|
|
|
#1
|
|||
|
|||
Urgent Please Fender Removal
Can Someone In This Forum Perhaps Tell Me If The Removal Of The Front L/h Fender On A 350se W116 Is A Bolt And Nut Action Or Is There Spot Welding Involved?
|
#2
|
|||
|
|||
Bolted on....but the original is GLUED as well! very good heat gun & putty knife or scraper needed..
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Have fun with the undercoating! Without an industrial heat gun, the job much more fun!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|