dowel pin removal s/420
 

hello,, i have some balo rotor that don,t have the rigth size centering hole,s the lug hole line up perfect with the wheel hub,, but i still have the 2 dowel pin connected to the hub,, what i want to do is remove the 2dowel pin from the hub so i can mount the rotor to the hub i already know about removing the 5mm allen screw that hole the rotor to the hub ,,,,,does any one know how i can remove the 2dowelpin frome the hub do they just screw back out ,,,,,,or do i have to reemove the hub and try to knock them out ,,,,,these rotor,s that they sell online,, balo,,,zimmmerman ,,, and some a,te, dont,quit,,fit ,,that all say on some eary model,s that the dowel pin,s must be remove,,, iguess i won,t be buying any more of these rotors off line,,, they must be an aftermarket,,brand rotor,,,, any HELP,, will be greatley helpful,, you can see the balo,, rotor,s on www.autopartsheadqauaters.com THANK,S VERY MUCH,,, M,DWYER 1994 S/420

The easiest way is to cut them off with die-grinder... MB does have bulletin & makes a special tool to PULL them out// Can't be pushed in.

OF course the hub can be removed & then press the dowel pins out..

dowel pin removal 94 s/420
 

THANK,S for the tip yhat you gave me ,, that, exacly,, what i did it was no point of try to take the hub off , so i just went ahead and Cut them off,, thank,s alot mel dwyer 1994 s/420