![]() |
|
|
|
#1
|
|||
|
|||
Rattle after engine mount replacement
Hi,
On my 1986 190E four-cylinder, I had a failed engine mount on the exhaust side that meant the engine vibrated a lot. This was replaced with (if I remember right) original parts, or at least good quality replicas (have heard bad stories about replica engine mounts..). Then, the engine developed a rattle. It's heard best inside the car with the windows closed. It's the sort of rattle that sounds like a timing chain rattling, or as if someone left a screwdriver under the bonnet.. I replaced other engine mount, no improvement. It's worst in 'D' at idle, still there driving at low speeds, not so bad in 'P', and gone in Reverse. What's causing it? ![]() Russell
__________________
190E's: 2.5-16v 1990 90,000m Astral Silver 2.0E 8v 1986 107,000m Black 2nd owner http://www.maylane.demon.co.uk/190esmall.jpghttp://www.maylane.demon.co.uk/190esmall2.jpg |
Bookmarks |
|
|