Quote:
|
Originally Posted by Strife
On my 107, I wired my Euro side markers to act as a turn signal in addition to the fronts. This wasn't easy given that there is only one filament in that bulb. On my spare set, I replaced the single filament with a dual (also not particularly easy), which should turn out better and easier. I think that turn signals visible from the side are a modern-day requirement.
|
Ditto here, too. Went looking for a socket that I could retro fit the sidemarker with dual filament bulbs. Didn't see anything I liked, so I just soldered leads right on the bulb and siliconed the bulb into the socket. Just take a little extra effort to change when one goes bad.
06-22-2006, 06:50 PM
Threaded Mode
