|
|
|
|
|
#1
06-25-2006, 10:49 AM
|
|||
|
|||
|
190 flywheel bolt size?
Hello,
Does anyone know what size flywheel bolt a 190E 2.3L uses? The Benz dealer only had 5 in stock, would aftermarket work if I knew the size?  Is it really that important to replace the flywheel bolts when re-surfacing the flywheel? :puzzled: Thanks, John 
__________________
1986 190D, 2.5L, 5-speed swap, 180,000 Miles (60K by me). Jeep CJ-7 with Cummins 4BT/NV4500/AtlastII 4.3. Grand Wagoneer 4BT project in progress! 
|
|
#2
06-26-2006, 11:12 AM
|
|||
|
|||
|
Anybody....? the dealer only have 5.
__________________
1986 190D, 2.5L, 5-speed swap, 180,000 Miles (60K by me). Jeep CJ-7 with Cummins 4BT/NV4500/AtlastII 4.3. Grand Wagoneer 4BT project in progress!
|
|
#3
06-26-2006, 12:03 PM
|
|||
|
|||
|
Flywheel bolts can be re-used as long as they meet the MIN thickness....
The thinnest portion of the bolt must be at least 8.1 MM ---0.319"
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
