dial indicator
 

can anyone describe the procedure for replacing front wheel bearings in a W202 car.
I actually will be installing new bearings on to a new steering knuckle but transfering over the old hub.

I've been educating myself with my Hyanes manual and this forums SEARCH feature.

I wanted to know where and what kind of dial indicator I need to set end float.
Would like to know if the hub is easy or needs a puller to be removed from old spindle.

And any insight to pressing in a new bearing.

Any info will be appreciated.

I've done ball joints and tie rods plus transmission fluid change on my car so if anyone needs info on those procedures let em know