|
|
|
|
|
#1
07-07-2006, 11:24 AM
|
|||
|
|||
|
Random connector with picture
I am in the middle of trying to fix my window and aux cooling fan. Will under the hood I noticed a connector not connected to anything. I have attached a picture. I am trying to find out where and what it should be connected to. This is a 1989 300E.
__________________
1983 240D Yellow 1989 300E Champigne 1993 190E Gray 1986 325 BMW Burgundy 1987 Chevy S10 Blazer 
|
|
#2
07-07-2006, 06:20 PM
|
||||
|
||||
|
Looks like the plug which holds the resistor for engine timing. My '86 300E has a brown and green wires to a plug which holds the resistor. In your case it looks like the resistor was removed. If you trace the cable it should splice into a harness just below the master brake cylinder. There is a lot of discussion on this forum about removing the resistor for additional performance.
Last edited by 865sp300e; 07-07-2006 at 08:17 PM.
|
 |
| Bookmarks |
|
|
Linear Mode
