Turn Signals all stopped working
 

All of my turn signals, both front and rear have stopped working. It was wondering fine the day before and then suddenly they stopped working. I checked all the fuses but they are all intact and working. What could be the problem?

What car? On the 123 chassis sometimes the hazard switch gets stuck in between on and off and this causes the turn signals not to work. Try turning the hazard lights on and off a few times.

Len

On my 95 E420 the relay that runs I believe the wipers also had something to do with the turn signals! Relay was not making good contact! If I pushed down of the relay it worked! I juryrigged a block made of cardboard for the top of the relay and when the cover was snapped down it pushed the relay down! Been working over 2yrs. now!:rolleyes: :rolleyes:


Smokie

If it's a w126, check the relay under the steering wheel.


A shoot of contact cleaner and mine started to work perfectly. (only after cleaning the hazard, replacing old fuses, etc...)