|
Mercedes 300e
Well after talking it over with many people. and the cost being a big part of my decision. Ive decided i have nothing to lose bye drilling the cylinder out myself. My question is what size and kind of drill bit should i use. ive already orderd the new cylinder, Can you help. Thanks James.
|
How do you drill out a piston ?
James:
Is the piston & ring stuck in the cyliinder walls.???? or do you mean hone out the cylinder walls?. If you go through all that trouble to free one piston you might as well do the rest and the exhaust valves. You may also want to check the bearing lash on the crank if you can remove the oil pan. I hope the problem is not too serious. Bob G |
I think he means the ignition switch cylinder.
In the Diesel forum someone was asking about a remote start switch but didn't specify whether a remote start switch to turn the engine over or something to start the engine from inside the house. Folks, you have the time to change fonts but not to provide needed details? C'mon :rolleyes: Sixto 93 300SD |
It's definitely a diamond drill. As for size, I don't know.
|
I would think you'd need several sizes, and work your way up. Best of luck, I gave it a try but moved on to replacing the steering lock as well.
|
| All times are GMT -4. The time now is 04:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website