90 300TE third stop light
 

90 300TE How do I replace the bulb on the third stoplight? It is located in a bezel on the lift gate, but I don't know how to remove the bezel. I'd like some advice before I break it trying.

Thanks for the help.

The housing is two pieces. If you look a the back piece, the one that does not touch the window you will see a small area towards the bottom of each side that has a different texture to it. You press in on each side at that point and pull the back piece back and then up at the same time.

That plastic is old and brittle and may break easily to go slow.

Thanks for the reply. I'll try it this afternoon.